Projector Screen Remote Control RF Remote Curtain Remote Motor Remote Automation

Projector Screen Remote Control RF Remote Curtain Remote Motor Remote Automation You need to connect the wires accordingly. No cables or plug supplied. PRODUCT DESCRIPTION: This RF Remote Controller features forward-reverse-stop capability. You can rotate the motor in up or down direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for motorised projection screens, electric curtains, electric pylonss, garage doors, retractable doors, etc The receiving controller with high security, large storage capacity, stable performance and low power consumption, and easy to use, without the use of traditional jumpers or DIP switch coding, just the remote control to send the wireless signal to the receiving control Receiver and storage can be used to achieve supporting. Each receiving controller can store multiple transmitters (remote control). If the learned remote control is lost in use, only the information stored in the receiving controller needs to be cleared and the lost remote control can not Receiving the controller for remote control, to regain the right to use, must be re-learned by the owner once to use, so as not only to avoid the owner when the loss of the remote control concerns, but also for the addition of a new remote control provides a convenient. Features: Wireless control, easy to install AC220V voltage input, according to the needs of your choice High confidentiality, large storage capacity, stable performance and low power consumption Each receiving controller can store multiple remote controller Remote control and manual control is fully compatible with The wireless signal can pass through walls, floors and doors. You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within 100 meters Mainly used to control: projector screen, electric curtains, electric pylon, garage doors, extendable doors, pumps, etc. Technical Parameters: 1, working voltage: AC220 ± 10% 2, the load power: = 500W 3, the working frequency: 315MHz  4, working temperature: -25 ? ~ 75 ? 5, remote control distance: 100 meters (open area) Method of use 1, the code: Open the receiver panel, connected to the power and then hold down the learning key (set key) hold, then the light starts flashing, release the learning key Press and hold any key on the remote control, indicating off, indicating that the success of learning . (After learning, press the up button or down button on the remote control to hear the sound of the relay beeping.) Otherwise, please re-learn. 2, Wiring: Please follow the circuit board marked on the power cord and the control line. Remote control and control panel keys role: ? key: roll up; = key: stop, power-off; ? key: scroll down NOTE: 1. the floor charged, do not touch after power 2.  if installed after the motor does not work exchange the direction and try again 3. You need to connect the wires accordingly. No cables or plug supplied. Package Included: 1 x Receiver 1 x Transmitter (with battery)